This sale is for a flat can motor upgrade kit for HO scale AHM Rivarossi 4-6-2 and 4-6-4 steam locomotive chassis only. This motor kit is intended for the early version locomotives with the square motor or later versions with the round motor mounted in the cab.
This motor will start turning smoothly on 1 volt DC. The newer version MDC motor is a good quality motor, and it does not need to be replaced. This kit also replaces the noisy MDC motor pinion gear, idler gear, and flywheel.
Hi, this sale is for a new can motor flywheel upgrade kit for the early Mantua Tyco 0-4-0, or 0-4-0T steam locomotives. This kit WILL NOT FIT later versions of locomotives that are equipped with Mantua’s can motor Power Drive System.
Hi, this sale is for a new dual shaft flat can motor dual flywheel re-power kit for HO scale brass diesels and heavy electric locomotives. This is a high torque heavy duty dual shaft flat can motor; it has a 5-pole skewed armature.
These larger wheelsets will look better and electrically perform better than the factory brass and plastic wheel sets. Illustrated installation instructions are included with the wheel kit. ARE NOT included with the wheelset kit.
Hi, this sale is for a new can motor flywheel upgrade kit for the Tyco or Mantua 2-8-2 or 2-8-4 Berkshire steam locomotive. I have can motor flywheel upgrade kits for the Mantua 0-4-0, 0-4-0T, 0-6-0, 0-6-0T, early 2-6-2, 4-6-2, 4-6-4, 4-6-0, 4-8-0, and 2-6-6-2 locomotives.
This sale is for a can motor flywheel upgrade kit for large or articulated HO scale brass steam locomotives made or imported by PFM, Akane, Hallmark, Tenshodo, United, Balboa, Alco Models, Samhongsa, Katsumi, and others.
This is a very high torquesingle shaft round can motor; it is designed for cordless drill service. The motor has a 5 pole armature, carbon brushes and brass bearings. There are 2 mounting holes on the front of the motor that are tapped for 2.6mm screws, the mounting holes are spaced 18mm apart.
This sale is for a can motor flywheel upgrade kit for HO scale AHM Rivarossi 2-8-2, 2-8-4, 2-10-2, and 4-8-4 steam locomotives. This motor kit is designed to replace the round or square Rivarossi motor mounted in the cab.
This kit WILL NOT fit the early Athearn models with the Hi-F rubber band drive. This kitWILL NOT FIT the Athearn AMD 103. or GE Dash 9. The dual motor DD40 will require 2 motor kits if your model has dual motors.